John Deere 652E

Double tap to zoom

 

Features

  • Field-installed propane conversion kits for Commercial Walk-Behind Mowers, QuikTrak™ Mowers, and Commercial ZTrak™ Mowers
  • Maintenance is simple and easy to reduce time and cost
  • 52-in. (132-cm) fabricated, fixed mower deck is made from 7-gauge, 0.177-in. (4.6-mm) steel for reliability and performance
  • Commercial-quality engine is reliable and provides excellent performance and life
  • Controls are easy to locate and use for operator comfort and productivity
  • Hydrostatic drive system is reliable and easy to use
  • Compact design for easy hauling and excellent maneuverability
  • Safety features are built-in to protect the operator and bystanders

Specifications

   John Deere 652E QuikTrak™ Stand-On Mower 
ENGINE
Manufacturer  
Model no. FX691V
Horsepower (gross) At 3,600 rpm, 22 hp
16.4 kW
Displacement 44.3 cu in.
726 cc
Cylinders Two, V-twin
Crankcase capacity With filter, 2.2 qt
2.1 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Forced air
Air cleaner Heavy-duty canister type with safety element
FUEL SYSTEM
Fuel type Gasoline
Fuel consumption  
Fuel tank capacity 5.6 U.S. gal.
21.2 L
Fuel tank switch/shut-off valve Yes
ELECTRICAL SYSTEM
Charge system At 3,600 rpm, 20 amp
Battery voltage 12 V
Cold cranking amp  
Hour meter Digital
Operator presence starting system Yes
DRIVETRAIN
Hydraulic pumps Hydro-Gear with fans, 0.73 cu in.
12 cc
Wheel motors Hydro-Gear, 15 cu in.
246 cc
Travel speed Forward
0-9.5 mph
0-15.3 km/hReverse
0-5.5 mph
0-8.9 km/h
Speed and direction control Twin hand-controlled levers
Hydraulic capacity With filter-wet, 2.9 qt
2.7 L
Dry, 5 qt
4.7 L
Hydraulic oil cooler  
Filter Spin-on replaceable
TIRES
Drive tires 20x10-8 Turf Master
Rear tires  
Load rating 4 PR
BRAKES
Dynamic braking Dual hand-controlled levers
Park brake Tire engagement
Park brake actuation Hand lever
PTO
Type Electro-Magnetic with brake, 200 lb-ft
271 Nm
Drive Dual B-section V-belt with Kevlar� cord
MOWER DECKS
Available widths 52 in.
132 cm
Deck construction Fabricated steel, fixed mounting
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1.25-5
3.2-12.7
Cutting width 52 in.
132 cm
BLADES
Length  
Thickness  
Tip speed 18,900 fpm
5,761 m/min
Number Three
WHEELS
Caster wheel type No-flat semi-pneumatic with sealed bearings
Caster wheel size 11x4-5
Front anti-scalp rollers Center, left
Rear anti-scalp rollers  
DIMENSIONS
Length 66 in.
167.6 cm
Width Deflector down, 66 in.
167.6 cm
Height 47 in.
119 cm
Weight 927 lb
420.5 kg
ADDITIONAL INFORMATION
Date collected 21-Apr-2017

Save time and schedule your service visit today